Choosing eaves for curtains and curtains, it is necessary to take into consideration forms and the size of a window, density of curtains and style of an interior.
The most part of profile and shtangovy eaves is on sale in special sets of independent assembly. However, the part of languid iron eaves with system of lifting of cords should be established by experts after all.
The flexible eaves will be suitable for a bay window or a niche, reaching the ends to edges of a bay window or bending around them. Sharp windings need to be avoided, that a begunok or a ring could slide. Certain types of eaves should be softened before installation, having shipped capacity with warm water.
Profile and shtangovy eaves have:
1. On a wall. Eaves for curtains and curtains in most cases fasten over a window gleam, in 7-12 cm from a frame. For moving and a razdviganiye of curtains eaves should enter at least on 15 cm from window edges. That the window looked "more harmonously", place eaves above a window frame and shift them on it is left.
2. On a window frame. This option use, if walls very narrow windows on the parties, and you wish to hang curtains of easy or average density.
3. On a ceiling. In this case, if a window the highest, it is possible to attach an arm to a ceiling.
4. In a window gleam. The curtain such as "cafe", "grid", "penthouse" is hung on a core or a bar снутри a window aperture. They are established along the edges or on a wood frame.
If eaves rather short, are necessary for their fastening of fastening from the 2nd parties. The eaves in length from 1,5 m, are intended for languid curtains and ask the next arm for support, for the most longish eaves of fastening are necessary through each 1,2 meters.
How to mount…
1. the 1st that is necessary for making is to measure width of a window. Buy profile or shtangovy eaves of the demanded length. Cut off a fret saw a tip.
2. Put an arm to a window and plan a pencil a place for саморезов.
3. Mark the provision of bolts by means of spirit level on reverse sides обровняйте points of the first arm.
4. By means of an electrodrill drill openings in points. Thrust jams, attach fastenings саморезами.
5. For the end of profile or shtangovy eaves thrust a tip, then put on begunka or rings, finish installation of the second tip and strengthen eaves on fastenings.